Quad LNB With Terrestrial Input

DESCRIPTION of Quad LNB with Terrestrial Input

• Universal Quad LNB With Terrestrial Input
• Outputs: 5
  • 4x Satellite
  • 1x Terrestrial
• Colour: Black
• Neck Diameter: 40mm
• Connections: F-Type Connectors
• Primarily Used With Universal Satellite Dishes (Alternatively, Use With Adapter on Sky Dish)
• Input Frequency
  • Low Band: 10.7 - 11.7 GHz
  • High Band: 11.7 - 12.75 GHz
• Output Frequency
  • Low Band: 950 - 1950 MHz
  • High Band: 1100~2150 MHz
• Noise Figure
  • Low/High Band: 0.3 dB Typ. (1 dB Max.)
  • Conversion Gain: 55 dB Min
• Manufacturer: Labgear / VisibleWave
• CC 8525600000 0.17kg Y

USES of Quad LNB with Terrestrial Input

• Use in conjunction with a UHF aerial to feed up to 4 combo receivers from a single universal satellite dish
  • At the set top box, the signal is split back out using a TV signal combiner

• Used in conjunction with our range of universal dishes from 60-120cm
• When used in conjunction with a MK3 to MK4 LNB Adapter, it is possible to use this LNB on a Sky satellite dish

ADVANTAGES of Quad LNB with Terrestrial Input

• Unlike normal LNBs, the Inverto quad LNB with terrestrial input has 4 satellite outputs & 1 terrestrial (Saorview) input
• This means you can feed one single cable to each viewing room with a combined satellite and terrestrial feed
• Offers a very simple and low cost solution to the problem of single cable multi-room setups
• The combined satellite & terrestrial feed can then be split out using a aerial & satellite combiner in reverse in the viewing location
• This saves time and money by only having the run one single cable to each viewing location

How it Works - Quad LNB with Terrestrial Input

• You simply connect your terrestrial (aerial) feed directly to the quad LNB
• The LNB works like a mini multiswitch by Combining:
  • A feed from the UHF aerial
  • A signal from a satellite dish (via he LNB)
• It outputs the following....
  • Up to 4 independent feeds containing satellite and terrestrial feeds
• Combined signal at each box is then split back out using the following...
  • A satellite & TV aerial combiner (in reverse)
  • A satellite and TV aerial wall plate
  • Alternatively don't split at all if running directly to a single tuner TV or set top box
    • This would give either satellite or terrestrial viewing - but not both