Cart is empty
Save 25%
DESCRIPTION of Outdoor Wireless Access Point
- 300Mbps Wireless Access Point
- Model: TP-Link CPE210
- Direct Replacement For Ubiquiti Networks NanoStation Loco M2
- Range: Up to 5 Kilometers
- What's Included
- Indoor / Outdoor Wireless Access Point
- 24V ~ 1A Passive PoE Adapter / Injector
- Pole Mounting Straps
- AC Power Cord
- Installation Guide
- Processor: Qualcomm Atheros 560MHz CPU, MIPS 74Kc
- Memory: 64MB DDR2 RAM, 8MB Flash
- Interface
- 1x 10/100Mbps Shielded Ethernet Port (LAN0, Passive PoE IN)
- 1x 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough)
- 1x Grounding Terminal
- 1x Reset Button
- Power Supply: Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
- Voltage Range: 16-27Vdc
- Power Consumption: Max. 10.5 Watts
- Note on When Deployed Using Passive PoE
- Power Drawn From Source is Higher Depending on Length of Connecting Cable
- Dimensions ( WxDxH): 224 x 79 x 60mm
- Antenna Type: Built-in 9dBi 2x2 Dual-polarized Directional Antenna
- Beam Width: 65° (H-Plane) / 35° (E-Plane)
- Protection: 15KV ESD Protection6KV Lightning Protection
- Enclosure: Outdoor ASA Stabilized Plastic Material
- IPX5 Waterproof Certification
- Certificates: CE, FCC, RoHS
- See Downloads Tab For Setup Instructions
USES of Outdoor Wireless Access Point
- Used to extend the range of your wireless network in an outdoor setting
ADVANTAGES of Outdoor Wireless Access Point
- Is waterproof and lightning proof
- Extends the range of you wireless network over a long range up to 5km
- Is capable of speeds of up to 300Mbps
- Is convenient where ability to run outdoor CAT5 or CAT6 cables is difficult
- Saves time and money by not having to run cables and also buy a network switch on the far end of the run
DISADVANTAGES of Outdoor Wireless Access Point
- While the range of the outdoor wireless access point is extremely good, environmental factors may reduce speeds and range
Note: User Manual Here
Note: Manufacturer is Solwise but video gives general overview of outdoor access points
