Search
Account
Contact

Humax HDR 1010S Freesat+ User Manual

 

Index

  • Humax HDR 1010S Freesat+ Box - Overview
  • Humax HDR 1010S Freesat+ Box - First Time Installation
  • Humax HDR 1010S Freesat+ Box - Factory Reset & Change Default Region
  • Humax HDR 1010S Freesat+ Box - Subtitles & Teletext
  • Humax HDR 1010S Freesat+ Box - How to Add Non-Freesat Channels
  • Humax HDR 1010S Freesat+ Box - How to Perform Software Update
  • Humax HDR 1010S Freesat+ Box - Freetime & On Demand
  • Humax HDR 1010S Freesat+ Box - Recording Live TV
  • Humax HDR 1010S Freesat+ Box - Series Link & EPG Recording
  • Humax HDR 1010S Freesat+ Box - Play Back TV Recordings
  • Humax HDR 1010S Freesat+ Box - Pause & Rewind Live TV
  • Humax HDR 1010S Freesat+ Box - Media Player

The videos and information below give a comprehensive overview on to how to install and use your new Humax HDR 1010S Freesat+ Box with Freetime

Humax HDR 1010S Freesat+ Box - Overview

Humax HDR 1010S Freesat+ Box - First Time Installation

  • With both satellite feeds and ethernet cable from router (optional) connected to your receiver
  • Press OK
  • Use arrow & OK buttons to change picture and sound settings
  • Arrow to next and press OK
  • Runs a signal test on both your satellite feeds
  • Takes less than a minute
  • Press OK on next
  • Enter Postcode
  • Use arrow buttons to type UK postcode (BT11AA for Northern Ireland channel variations)
  • Arrow to next and press OK
  • Press OK to save channels
  • Tries to connect to your WIFI
  • Press OK when finished
  • Next step is to set pin code or skip this step
  • Press OK on start watching freesat
  • Process complete

Humax HDR 1010S Freesat+ Box - Factory Reset & Change Default Region

  • Press settings button on remote
  • System Settings
  • Factory Default: Yes
  • Asks for pin code 0000 (four zeros)
  • Box reboots
  • You are back to first time install
  • You can change your postcode during the setup

Humax HDR 1010S Freesat+ Box - Subtitles & Teletext

  • Press SUB on remote to activate subtitles
  • Press again to turn off
  • Press TEXT on remote to access digital teletext
  • Use arrow buttons to navigate the teletext menus
  • Press TEXT to get back to live TV

Humax HDR 1010S Freesat+ Box - How to Add Non-Freesat Channels

  • Press the Settings button on the remote
  • Go to System Settings
  • STB Mode
  • Change to Non-Freesat Mode
  • First time around it will say no channels available, press OK to search channels
  • Use arrow buttons to arrow to 'Transponder - All' and press OK
  • Select a TP from the predined list and scan or create your own custom settings
  • Adding a User Defined TP
    • Select user defined
    • Example for adding EWTN  
      • Freq: 11260 
      • Pol: V (Vertical) 
      • Symbol Rate: 27500 
      • Transmission: DVB 
      • FEC: Auto
    • Arrow down and select save
    • Use arrows to select User Defined
    • Leave settings here as default
    • Select start channel search and press OK
    • Will pull in all channels on that TP
    • To save channels press OK
  • To get back to Freesat mode, press the home button on the remote
  • Select Freesat Mode and press OK
  • You are now back in Freesat mode

Humax HDR 1010S Freesat+ Box - How to Perform Software Update

  • Press settings on remote
  • Go to system settings
  • Use arrows to go to Software Update and press OK
  • Search new software
  • If one available, use arrows to select start software update and press OK
  • Will take a couple of minutes
  • DO NOT TURN OFF BOX WHEN THIS UPDATE IS DOWNLOADING
  • Press OK button when complete
  • Box will reboot
  • Installs the update on reboot
  • DO NOT TURN OFF BOX WHEN THIS UPDATE IS INSTALLING
  • Box will reboot
  • Software update is now complete

Humax HDR 1010S Freesat+ Box - Freetime & On Demand

  • The video above explains about Freetime, Freesat's on demand and catch up service
  • Freetime is delivered over your broadband
  • The are limitations to Freetime in the Republic of Ireland 
  • The limitations can be got around but we cannot provide this information
  • You should google geo blocking to find out more

Humax HDR 1010S Freesat+ Box - Recording Live TV

  • With The Humax HDR 1010S you can record one channel and watch another other at the same time
  • The video above shows it's live recording in action
  • You can also record two channels at the same time

Humax HDR 1010S Freesat+ Box - Series Link & EPG Recording

  • Within the EPG you can set individual recordings or series link a particular show
  • Individual recordings are marked differently than series linked shows in the EPG
  • See both in action in the video above

Humax HDR 1010S Freesat+ Box - Play Back TV Recordings

  • To access what you have already recorded press the Recordings button
  • Once in this menu you can manage and playback your recordings
  • The video above shows the 'My Recordings' features in action

Humax HDR 1010S Freesat+ Box - Pause & Rewind Live TV

  • To pause live TV, press the pause button on the remote
  • To resume playback, simply press the play button on the remote
  • Within the pause range, you can rewind and fast forward
  • If you have been watching a show for a little time, you can press the rewind button to go back to earlier point

Humax HDR 1010S Freesat+ Box - Media Player