Cart is empty
Save 28%
Description of 4K HDMI Input Selector
- 4 Way 4K HDMI Input Selector
- AKA 4 Way HDMI Switch
- Note: Works With Sky Q, Sky+ HD & Virgin Media 4K Receivers
- Supports HDMI 2.0 & HDCP v2.2
- Input: 1x 4K HDMI
- Output: 4x 4K HDMI
- 3D Support: Yes
- Deep Colour: 48-bit
- Single Link Range: 3840x2160p
- Bandwidth: 340MHz
- Signal Speed: 19.2Gbps
- Max. Length of Input Cable: <= 10m
- Max Length of Output Cable: <= 10m
- Vertical Frequency Range: 30Hz
- Power Unit: 5V ~ 1A
- Backwards Compatible With Normal 1080p HDMI Cables
- Colour: Black
Uses of 4K HDMI Input Selector
- Ideal for use when you have a number of 4K HDMI devices, for example
- A 4K satellite receiver
- Sky Q receiver
- Sky+ HD box
- Virgin Media 4K receiver
- Games console
- 4K media player
- But only have a single spare HDMI input on your 4K TV
- This device allows you to connect four 4K devices to your 4K TV and switch between them using a remote control
Connecting & Operating the 4K HDMI Input Selector
- Run a 4K HDMI lead from the HDMI 'Output' port on the back of the 4K HDMI Selector to your 4K TV
- Connect each HDMI device to a different HDMI 'Input' on the back of the selector
- Now switch on the TV & select the HDMI Channel on the TV
- You can now select the device you want by selecting input 1, 2, 3 or 4
ADVANTAGES of 4K HDMI Input Selector
- it supports picture resolution up to UHD (Ultra High Definition) (4K x 2K)
- It allows you to switch between devices without having to get out of your seat or pull out any wires
- Allows you future proof by putting some 4K architecture in place
- It is backwards compatible with traditional (1080p) HDMI cables & equipment
- It gives perfect picture and sound quality
- It is very easy to install
- We have tested it on a range of 4K devices and it works with them all
DISADVANTAGES of 4K HDMI Input Selector
- It is yet another remote
- Dearer than a normal 1080p HDMI input selector
- Cannot run inputs and outputs longer than 10m
- To get best resolution, you must use 4K HDMI cables
