Search
Account
Contact

TV Connectors & Cables

  • How to Strip Back Coaxial Satellite TV Cable
  • How to Put on an F Connector
  • How to Put on a Coax Connector
  • How to Put on an F-Type Joiner
  • How to Put on a Coaxial Joiner
  • Coaxial to F Connector Adaptors

How to Strip Back a Coaxial Satellite TV Cable

Tools: Snips

Equipment: RG6 Satellite & TV Aerial Cable

  1. Using a snips, pare back 20mm from the end of the RG6 cable
  2. Wrap the earth cable clockwise around the base of the cable
  3. Cut off the exposed silver foil
  4. Cut back the white foam to leave 5-10mm gap of exposed foam between the earth and core cables
  5. Leave 10-15mm of the central copper core exposed

How to Put on an F Connector

Tools: Snips

Equipment: RG6 Satellite Cable, F-Connector

  1. Using a snips, pare back 20mm from the end of the RG6 cable
  2. Wrap the earth cable clockwise around the base of the cable
  3. Cut off the exposed silver foil
  4. Cut back the white foam to leave 5-10mm gap of exposed foam between the earth and core cables
  5. Screw the 'F' connector onto the cable in a clockwise manner until it is firmly held
  6. Use snips to cut the copper core wire so that it is 3mm above the top of the connector

How to Put on Coax Connector

Tools: Snips

Equipment: RG6 Satellite Cable, Coaxial connector

  1. Using a snips, pare back 20mm from the end of the RG6 cable
  2. Wrap the earth cable clockwise around the base of the cable
  3. Cut off the exposed silver foil
  4. Cut back the white foam to leave 6mm gap of exposed foam between the earth and core cables
  5. Unscrew the coax plug to expose its component parts - Body, pin, collar and clamp
  6. Slide the clamp down over the satellite cable.
  7. Push the collar onto the end of the cable and squeeze it's legs so they clamp around the exposed copper
  8. Next slide the pin into position over the copper core wire
  9. Now slide the body onto the cable and screw the clamp onto the body until it is firmly clamped
  10. Use snips to cut the copper core wire so that it is flush with the top of the connector

How to Put on an F-type Joiner

Equipment: RG6 Satellite Cable, F-Type Joiner / Coupler

  1. Take the first cable with an F-connector on the end and screw an F-joiner into the connector
  2. Take a second cable cable with an F-connector on the end and screw it onto the F-joiner

How to Put on a Coaxial Joiner

Equipment: RG6 Satellite Cable, Coaxial Coupler / Joiner

  1. Take the first cable with a coaxial connector on the end and push a coaxial joiner into the connector
  2. Take a second cable with a coaxial connector on the end and push it into the coaxial coupler/Joiner

Coax to F Connector Adaptors

Equipment: RG6 Satellite Cable, F-Connector, Coax Connector, Coaxial to F Adaptors

  1. Push the coax end of the coax to F adaptor onto a lead which is terminated with a coaxial connector
  2. Take a second lead which is terminated with an F-connector and screw this into the F end of the coaxial to F adaptor
  3. The 2 leads have now been joined together using the coax to f adaptor

Associated Products