Search
Account
Contact
Next Working Day Delivery Available on Most Products

Power Pass 4 Way TV Splitters

Z6A_proSPL409P_BK_NXT
In stock
7.45 (ex VAT)
(9.16 Incl. VAT)
+
Bulk Discounts
Qty 10+
Price 7.30

video guides available

DESCRIPTION of Power Pass 4 Way TV Splitters

  • 4 Way Power Passing TV Splitters
  • Inputs: 1
  • Outputs: 4
  • Connections: F-type
  • Range: 5-2300MHz
  • Bands: FM / UHF / VHF / Satellite
  • Power Passing: 1 Leg
  • Model #: proSPL409P
  • Loss: 9dB
  • CC 8529108090 15g Y

USES of Power Pass 4 Way TV Splitters

  • To split a TV signal to several rooms
  • For use in conjunction a power unit and a masthead amplifier
  • Split TV analogue signal to give independent viewing in several rooms
  • Split output from a sky box to allow sky picture to viewed in more than one room (will only support a sky eye on 1 leg - the power passing one)

ADVANTAGES of Power Pass 4 Way TV Splitters

  • Very effective means of splitting signal with a low level of signal loss
  • Can be use with masthead amplifier as it allows power to pass through
  • Very inexpensive compared to a Distribution Amplifier
  • Does not need power supply
  • They are compact and have robust metal housing
  • They are relatively easy to install
  • In a good reception area they can feed the signal to at least 4 and up to 8 TVs without a significant signal loss

DISADVANTAGES of Power Pass 4 Way TV Splitters

  • They are more expensive than unpowered splitters
  • By definition splitters always lead to a certain level of signal loss while a Distribution Amplifier would actually boost the signal
  • Only supports the use of Sky eyes on the power passing leg

Summary: An F-type splitter is used to allow signal from an aerial to run to several rooms to allow independent viewing.

They come in a range of sizes 2, 3, 4, 6 and 8 way.

There are 2 basic types:

  • Passive splitters: Are used to distribute un-amplified (or post amplified) signal to several rooms.
  • Power passing splitters: Can be used between a power unit and the Masthead amplifier/Aerial.
  • They allow the 12 volt signal from the power unit to pass through to the Masthead amplifier
  • while also distributing the amplified signal on the other ports.

Equipment needed

  • Snips
  • Splitters
  • F type twist on connectors

Procedure to install a TV Splitter (Power Passing) 

  1. Cut the input cable coming from the Masthead Amplifier 
  2. so that it is long enough to reach where all the cables coming from the various rooms terminate at a single point
  3. Put an F connector on the aerial cable and also on all cables feeding the various TV points which are to be connected
  4. Connect the aerial cable to the "IN" port on the splitter
  5. Connect the cable coming from the Power Unit to the "OUT" port that is marked "POWER PASS"
  6. Connect the TV point cables to the "OUT"  ports on the splitter

Main Points to remember

  • Splitters are used as a simple, effective and low cost alternatives to distribution systems
  • work well when the initial signal strength is good. 
  • Passive splitters do the same job at a lower cost than power passing splitters for a standard unpowered system 
  • P pass splitters are designed for use with power units and masthead amps but can work as passive splitters
  • Never use splitters in series (looped one after the other) as this will lead to high levels of signal loss
  • Always use F-type splitters as IEC (Coax) splitters normally have high levels of signal loss  
Just what i needed,good price too
Write a review

We aim to provide a fast, reliable & low cost delivery service

All orders we ship, leave our warehouse on time

  • Standard Courier With Fastway (2-4 Working Days)
    • Cost is €3.95 on Orders Below €100
    • Free Delivery on Orders Above €100
  • Express Courier (1-2 Working Days)
    • With Fastway: Cost is €6.50 (or €2.50 extra if you qualify for free standard shipping)
    • With DPD: Cost is €7 (or €3 extra if you qualify for free standard shipping)
    • This service guarantees that any order placed before 4.30pm with Fastway or 3pm With DPD (Mon - Fri) will ship from our depot that same day on the express delivery service*
    • *Orders placed after 4.30pm with Fastway or 3pm with DPD on Fridays & during weekends / bank holidays will be shipped the next working day
  • An Post
    • Cost is €2.50 (P & P)
    • Available only on selected products with the An Post logo
  • Small Parcels
    • Cost is €3.50
    • Available only on products with the small parcels logo**
  • Great Britain
    • Cost is €7.50
  • Western Europe
    • Cost is €10
    • Belgium, France, Germany, Holland, Italy, Lithuania, Luxembourg, Spain, Portugal etc..
  • Rest of Europe
    • Cost is €20
    • Croatia, Czech Republic, Estonia, Iceland, Malta, Slovenia, Switzerland, Norway, Sweden, Finland etc..
  • Rest of World
    • Cost is €30
    • Please contact us before purchasing to confirm

Terms

  • All shipping fee prices listed are ex-VAT @ 23%
  • Irish shipping rates apply to the whole Island (North & South)
  • Shipping fee is fixed for an order, regardless of the number of items bought
  • All courier orders require signed proof of delivery and the customer must be contactable by phone
  • We do not offer a weekend delivery service (Mon-Fri only excluding bank holidays)
  • *Our courier achieves a 98% success rate on express deliveries
  • ** Applies to island of Ireland only (North & South)
  • Heavy or Large Parcels (Applies only to Non Irish or UK customers): It may be necessary to charge higher shipping fees / offer option to cancel order

Associated Products Associated Products