Search
Account
Contact
Next Working Day Delivery Available on Most Products

Edision™ OS NINO+ DVB-S2 + DVB-T2/C Combo Linux Receiver

Z1_01-08-0009_ED
In stock
£87.71 (ex VAT)
(£107.89 Incl. VAT)
+
Bulk Discounts
Qty 3+
Price £83.32

video guides available

DESCRIPTION of Linux Receiver

  • HD Linux Receiver
  • Manufacturer: Edision
  • Model: OS NINO+ DVB-S2 + DVB-T2/C
  • Contents
    • Remote control
    • External PSU 12v
    • Jack to RS232 cable
    • Start Guide EN/DE/GR
    • 2 x ΑΑΑ batteries
  • Front Panel
    • Display: LED (Standby, Recording)
    • 1 x Smartcard slot
  • Side Panel
    • 2 x USB 2.0
  • Back Panel
    • Input Sat-IF: 1x F-type
    • Input RF: 1x IEC-type
    • Connection TV: 1x HDMI
    • Video output (digital): 1x HDMI
    • Audio output (analog): Standard optical (S/PDIF)
    • 1 x Ethernet plug
    • 1 x Jack to RS232
    • 1 x Jack to IR
    • 1 x DC in (for the external PSU)
  • Linux operational system
  • Processor: Mips Broadcom 742 MHz Dual-Core
  • Speed Up to speed 742MHz and up to 2000 DMIPS
  • 512MB SLC NAND Flash / 512MB of DDR3 memory
  • Video Resolution: 1080p, 1080i, 780p, 720p, 576p, 576i, 480p, 480i
  • WiFi Connection: embedded
  • Bluetooth: embedded 2.1/3.0/4.0
  • Dimensions (WxHxD): 145 x 35 x 120mm

USES of Linux Receiver

  • Linux based HD combo receiver for receiving both
    • Irish Digital Terrestrial TV (Saorview Channels)
    • Standard & HD UK Satellite Channels
  • Channel List (See List of Channels Tab) Includes
    • RTE 1, RTE 2, Virgin Media One, Virgin Media Two, TG4, Virgin Media Three, TG4, RTE One +1, RTEjr etc..
      • Need to tune Irish channels to your local transmitter (See video guides)
    • BBC 1,2,4, UTV, ITV 2,3,4, ITV be, Channel 4, More 4, E4, Film 4, Channel 4/7 etc
    • Channel 5, CBS, Showcase, Food Channel, Travel Channel, EWTN, VIVA, Pick, Challenge, Dave, Home, Quest, Really etc..
    • CITV, CBBC, Cbeebies etc..
    • Sky News, BBC News, Euro News, CNN, CNBC etc
    • True Movies 1 & 2, True Drama, Horror Channel, Men & Movies etc
    • Huge Array of Music Channels
    • All +1 Channels Where Available
    • HD Channels include the following
      • BBC 1 HD, BBC 2 HD, BBC 4 HD, CBBC HD, Cbeebies HD, UTV HD, C4 HD, BBC News HD, RTE 1 HD, RTE 2 HD etc..
  • PVR Features - Add recording with an external hard drive (may need to be mains powered) or USB stick up to 32GB
  • Allows viewer to record live TV shows

ADVANTAGES of Linux Receiver

  • The big advantage of the receiver is that as the name suggests, it is based on the Linux OS and comes with the stability of that operating system
  • The receiver is capable of a variety of internet functions (Youtube, Shoutcast, Opera etc)
  • It contains a card reader
  • Supports both standard & high definition transmissions
  • It futures proofs your investment by meeting all the latest HD standards
  • Has PVR features (ie. Can pause/record Live TV with addition of external storage device)

DISADVANTAGES of Linux Receiver

  • More expensive than a standard definition satellite receiver
  • The receiver is more expensive than a non linux based HD combo receiver
  • It does not have an RF out ie.. it is not possible to run the picture to an additional room unless you use an external HDMI Modulator
Coming soon...

Index

  • How to Assemble a Zone 2 Satellite Dish
  • How to Mount a Zone 2 Satellite Dish
  • How to Align a Zone 2 Satellite Dish
  • Running Cables & Attaching Connectors
  • Installing Your Satellite Receiver

1. How to Assemble a Zone 2 Satellite Dish

List of satellite dish components

  • 60cm Satellite Dish
  • Wall Bracket
  • Wall Tube (Arm)
  • Elevation Bracket
  • Dish Bracket
  • Fixing Kit
  • Feed Arm

Tools Needed to Assemble Satellite Dish

  • 10mm, 13mm socket and ratchet
  • Philips screwdriver

Steps to Assemble Satellite Dish

  • Open fixing kit and select U-bolts (qty: 2), nuts (qty: 4)
  • Insert the U bolts through the wall bracket
  • Thread on the nuts
  • Insert the arm and tighten the nuts using 10mm socket and ratchet
  • The wall bracket & arm assembly is complete
  • Next insert U-bolts (qty: 2) through the elevation bracket
  • Loosely tighten nuts
  • Attach the elevation bracket to the dish bracket
  • Using bolts and washers (qty: 4), tighten with 13mm socket and ratchet
  • Use the bolts and nuts (qty:4) and the Philips screwdriver to attach the dish bracket to the dish
  • Use the long threaded bolt and small nut to attach the feed arm to the back base of the dish bracket so the arm protrudes in front of the dish
  • Finally insert the LNB (and plastic insert) into the end of the arm and secure with a tie wrap

2. How to Mount a Satellite Dish

Equipment needed to mount a satellite dish on a wall

  • Zone 2 satellite dish, complete with wall bracket and arm
  • Coach bolt M8 x 50mm & 10mm plastic plugs (qty: 4)

Tools needed to mount on a wall

  • Cordless drill - ideally a 24-36v SDS Drill
  • 8mm, 10mm drill bits
  • 10mm, 13mm socket and ratchet
  • Satellite meter

Criteria on where to mount the satellite dish?

  • Dish must face South East (141 degrees i.e. direction of sun 11am BST)
  • Wall must be a solid surface capable of carrying weight of satellite dish
  • Signal must not be blocked by houses or trees (signal is coming in at 21 degrees to the horizontal)
  • Place at back or gable end of house to minimise visual intrusion
  • Place as close at possible to TV room to which the satellite cables are to connected so as to minimise cable run

Steps

  • Place the wall bracket and arm in the correct location
  • Use the cordless drill and 8mm drill bit to drill 4 guide holes
  • Use 10mm drill bit to drill holes to a depth of 60mm
  • Insert the 4 plastic plugs in the holes and mount the wall bracket using the 4 coach bolts
  • Tighten the coach bolts using the 13mm socket and ratchet
  • Attach the satellite dish to the arm of the wall plate
  • Use 10mm socket to lightly tighten the dish 'U'-bolts so they are fixed to arm but the dish can still be rotated
  • Follow steps in the how to align a satellite dish guide

3. How to Align a Zone 2 Satellite Dish

  • Having already mounted the satellite dish on your wall
  • Attach your satellite meter to the dish LNB
  • Align the dish so that it is (1) perfectly vertical, (2) pointing south east (141 degrees).
  • Rotate the dish slowly over and back
  • Repeat adjusting the tilt angle by 1 or 2 degrees to until a signal is found
  • Tighten the U-bolts and side bolts using the 10mm & 13mm sockets
  • Disconnect the satellite meter
  • Connect a cable with an 'F-type' connector from the dish to the satellite box
  • Check that the signal is working

4. How to Run Cables & Attach Connectors

The next step is to run satellite cable to the satellite receiver

Tools needed

  • Hammer
  • Snips
  • Drill
  • SDS Drill Bit 10X450

Equipment

  • Satellite Installation Kit

Prior to beginning you must decide

  • Decide how to run cable
    • Connect into existing cables in the attic
      • Normally neater but requires additional connectors
      • May need a multi-meter to be able to identify the correct cable
      • May result in longer cable runs
    • Run a cable directly from the satellite dish to the satellite receiver
      • Fastest and easiest way to run a cable
      • Cable runs are normally shorter
      • Requires the drill of a hole through a wall

STEPS

  • If the satellite receiver is to be located next to the external wall of a room
    • Use a drill and an SDS Drill Bit 10x450 to drill a hole through the wall
    • Ensuring to drill from the inside out
  • To conceal broken plaster use either
    • Hole tidy (insert inside and out before the cable is run)
    • Cable cover nailed onto the outside wall after the cable has been run
  • Feed the end of the satellite cable through the wall leaving enough cable to reach the front of the satellite box
  • Now start tacking the cable using 7mm clips and a hammer
  • Ensuring that the cable runs down from the hole that been drilled in the wall
  • This will stop water following the cable into the house
  • Continue tacking the cable
    • Run cable vertically or horizontally but NEVER diagonally
    • If possible hide cable under the plinth or behind drain pipes (using 300mm cable ties)
  • Cut the cable leaving enough length to reach the LNB of the dish
  • Put on an F connector on the each end of the satellite cable
  • Screw the F connector on to the LNB
  • Seal the connection using Insulation tape or ideally waterproof self amalgamating tape
  • Secure the cable to the dish feed arm using either 300mm cable ties or Insulation tape
  • Final step is to put on an F connector on the satellite cable next to the satellite receiver

How to Put on F-Type Connectors

5. How to Install Your Satellite Receiver

  • Unpack the box
    • Satellite receiver
    • Remote control
  • Screw the lead from the satellite dish into the LNB in connection
  • Connect a scart or HDMI cable from your TV to the box
  • Plug in the power lead
  • Turn on the power switch on the back on the box
  • After 5-6 seconds the box will come on and should automatically switch TV to AV channel
  • You may need to switch AV channel on TV if it does not automatically switch over

Combo Receiver Channels

Great box works really well and is nice and compact. Have bought a few different boxes from this site over the years and they're always on hand to answer a u questions
Write a review

Installation Diagram (combo-receiver-setup.pdf, 680 Kb) [Download]

We aim to provide a fast, reliable & low cost delivery service

All orders we ship, leave our warehouse on time

  • Standard Courier With Fastway (2-4 Working Days)
    • Cost is €3.95 on Orders Below €100
    • Free Delivery on Orders Above €100
  • Express Courier (1-2 Working Days)
    • With Fastway: Cost is €6.50 (or €2.50 extra if you qualify for free standard shipping)
    • With DPD: Cost is €7 (or €3 extra if you qualify for free standard shipping)
    • This service guarantees that any order placed before 4.30pm with Fastway or 3pm With DPD (Mon - Fri) will ship from our depot that same day on the express delivery service*
    • *Orders placed after 4.30pm with Fastway or 3pm with DPD on Fridays & during weekends / bank holidays will be shipped the next working day
  • An Post
    • Cost is €2.50 (P & P)
    • Available only on selected products with the An Post logo
  • Small Parcels
    • Cost is €3.50
    • Available only on products with the small parcels logo**
  • Great Britain
    • Cost is €7.50
  • Western Europe
    • Cost is €10
    • Belgium, France, Germany, Holland, Italy, Lithuania, Luxembourg, Spain, Portugal etc..
  • Rest of Europe
    • Cost is €20
    • Croatia, Czech Republic, Estonia, Iceland, Malta, Slovenia, Switzerland, Norway, Sweden, Finland etc..
  • Rest of World
    • Cost is €30
    • Please contact us before purchasing to confirm

Terms

  • All shipping fee prices listed are ex-VAT @ 23%
  • Irish shipping rates apply to the whole Island (North & South)
  • Shipping fee is fixed for an order, regardless of the number of items bought
  • All courier orders require signed proof of delivery and the customer must be contactable by phone
  • We do not offer a weekend delivery service (Mon-Fri only excluding bank holidays)
  • *Our courier achieves a 98% success rate on express deliveries
  • ** Applies to island of Ireland only (North & South)
  • Heavy or Large Parcels (Applies only to Non Irish or UK customers): It may be necessary to charge higher shipping fees / offer option to cancel order