IQCCTV IQR4D Video User Manual

Index

Overview of the DVR
How to Connect the DVR to a TV
How to Connect the DVR to a Computer Monitor
How to Install a Hard Drive in a DVR
How to Format the Hard Drive
The DVR's Recording Functionality
Playback of Recordings
How to Extract/Backup your Recordings to a USB Device
General Advice on Connecting up a PTZ Camera to a DVR
How to Setup & Use PTZ on the DVR
Troubleshooting a Continuously Beeping DVR
Changed Password but Forgot New One?

Overview of the 4 Channel DVR

How to Connect the DVR to a TV

How to Connect the DVR to a Computer Monitor

How to Install a Hard Drive in a DVR

How to Format the Hard Drive

Recording Functionality

Playback Options

How to Extract/Backup your Recordings to a USB Device

General Advice on Connecting up a PTZ Camera to a DVR

How to Setup & Use PTZ on the DVR

Troubleshooting a Continuously Beeping DVR

Changed Password but Forgot New One?

The default master password for the DVR is all 0s (Zeros). In the event that you change this password but then cannot remember it, the override master password for the DVR is 101101

INDEX

Setting up your DVR for Networking
- How to Find your IP Address on a Local Area Network
- How to Configure the IP Address on your DVR
- How to Configure the DVR for Remote Access
- How to Configure your Router for Port Forwarding
Accessing your DVR from your Smart Phone
- How to Download & Install KMEye from the App Store
- How to Configure KMEye on your SmartPhone
Accessing your DVR via NetDVR on your PC
- How to Install NetDVR on your PC or Laptop
- How to Configure NetDVR for Remote Access

How to Find your IP Address on a Local Area Network

Note: Done on Windows XP
Click on start button
Click on run
Type 'cmd' into the run window and press OK
The command prompt window should open up
Type 'ipconfig' in this window and press enter
Take note of the ip address
To shut the window, type exit and press enter
To open command prompt window on windows vista or windows 7, google how to do it

How to Configure the IP Address on your DVR

Bring up the menu system
Go to advanced
Go to network
TCP/IP TYPE: STATIC
MEDIA PORT is 9000
WEB PORT is 80

Use what you have learned from the previous video on determining your IP address on a LAN to create an IP address for the DVR
Click apply. Follow the instructions and then the DVR will reboot.

How to Configure the DVR for Remote Access

Bring up the menu system
Go to advanced
Got to Mobile menu
Set and take note of all of the following;
- Username: (whatever you like)
- Password: (don't make it too simple)
- Server Port: 15961
Click on apply & follow the instructions

How to Configure your Router for Port Forwarding

Note: This is only shown using a grey type eircom router. This tutorial is predicated on the fact that you have already obtained a static IP address from your broadband provider. These can be obtained easily and are relatively inexpensive and in some cases actually free. To see how to implement port forwarding on your particular make and model of router, you need to go to a website called portforward.com

You will also need to find out what the default IP address, user logon and password for your particular make and model is. This will be in the documentation that is provided with your router. Your broadband provider may also provided you with if you contact them. Again, the website portforward.com is a goldmine of information in this regard.

On the grey type eircom router

Type 192.168.1.254 into your URL bar
Click on Expert mode
Go to Configure
Click on Advanced
Click on NAT (may be called Port Forwarding on some routers)
Click on Define custom service
Leave Port Forwarding ticked and click on next
Enter the following;
- Service name: (can be whatever you like)
- Global port range: 9000 - 9000
- Base host port: 80 (use 81 if it is already taken)
- Protocol: TCP
Click on next
Click done
Select the service name you created from the dropdown list and then click on enable
Leave the next settings as default and then click on enable button
Port forwarding is now set up

How to Download & Install KMEye from the App Store

You'll need an Apple App Store account for this.
KMEye is a free app so there is no additional costs involved.
Just search for the KMEye app, download and install it.

How to Configure KMEye on your SmartPhone

Once you have the KMEye app installed on your smart phone just open the app
Touch the settings icon
Touch the + icon to add a device
Enter the following information
- Name: (what ever you like)
- Address: This is the Static IP address that your broadband provider gave you
- Port: 15961
- User id: (Whatever you set it as in the mobile menu on the DVR)
- Password: (Whatever you set it as in the mobile menu on the DVR)
- Scroll screen down to set Max Channels (4 - 32)
Touch save to complete setup
You can now view your DVR remotely using a smart phone

How to Install Net DVR on your PC or Laptop

Simply remove the CD from the packaging that comes with the DVR and follow the instructions provided in the video above. It's a very quick and simple process.

How to Configure Net DVR for Remote Access

Once you have the Net DVR program installed on you PC or Laptop simply;

Open the program on your PC by clicking on it

It will ask you for some information including;

IP Address: (see below for more info)
*Media Port: 9000
Password: (Whatever you set it as in the mobile menu on the DVR)
*Network: Internet or LAN option (see below for more on this)
Language: English

Note: It will ask you for your IP address. But this will depend on how you want to access the DVR.

*If you select LAN as the network option, you MUST use the static IP address you gave the DVR in an earlier stage of the process. This will allow you to view the DVR within your own network.
*If you select Internet as the network option, then you MUST use the static IP that your boradband provide gave you

All other settings remain the same. Once you have all this info entered, Just click login to view your DVR.