Search
Account
Contact

How to Install a T & K Wall Bracket

Tools Needed

  • A ladder
  • SDS cordless drill
  • Short 8mm, 16mm drill bits
  • Ratchet with 13 & 17mm long neck sockets
  • Snips
  • Safety equipment (harness, safety mat etc)

Equipment Needed

  • T&K wall bracket set (Choice of 12, 18 or 24 inch sets with 18" being most popular)
  • Pole (1.8m long, 32mm diameter - steel or aluminium)
  • Shield anchor bolt M10 (qty: 5)
  • U-bolts - small or large will do (qty:2)

Location

  • On a gable wall of a house to ensure aerial is above roof line of neighbouring buildings if possible

Steps to Install

  • Position ladder to left (if right handed) of where brackets are to be mounted.
  • Secure the ladder and put on all safety equipment
  • Ascend the ladder with the drill, tools, bolts and T-bracket
  • After selecting desired location, use 8mm bit to drill guide holes
  • Now use 16mm bit to drill hole
  • Use ratchet and 17mm socket to bolt on T bracket using the shield anchor bolts
  • Position K bracket approximately 35cm below the T bracket
  • Insert the U-bolts into the bracket and loosely tighten
  • THE T & K WALL BRACKET INSTALLATION IS NOW COMPLETE

Associated Products Associated Products

Associated Products